Thursday, May 30, 2013

BMW K1300GT Touring Bikes

2009 BMW K1300GT Sport Touring
BMW K1300GT picture

Tuesday, May 28, 2013

2012 Aprilia RSV4 Factory APRC Review

2012 Aprilia RSV4 Factory APRC Review
2012 Aprilia RSV4 Factory APRC
THE ONLY SUPERSPORT BIKE WHICH ALLOWS THE RIDER TO SAFELY REFINE HIS RIDING ABILITY THANKS TO THE APRC DYNAMIC CONTROL PACKAGE.
This new technology is brought together in the APRC (Aprilia Performance Ride Control) package, basically the state of the art in dynamic performance control, a multi-patented system that makes Superbike winning technology available to professional racing riders and hobby riders alike. The new features introduced by the Aprilia RSV4 APRC in detail:
APRC Aprilia Performance Ride Control, the electronic management package including:
- ATC: Aprilia Traction Control automatically adjusts to different types of tyres, with 8 settings conveniently selectable while racing from a joystick on the left handlebar without turning down the throttle;
- AWC: Aprilia Wheelie Control with three settings;
- ALC: Aprilia Launch Control, for use on the track only, with 3 settings;
- AQS: Aprilia Quick Shift, for ultra-fast shifting without closing the throttle or using the clutch.
Improved engine lubrication;


Sunday, May 26, 2013

2011 Can Am Spyder RT Audio

2011 Can-Am Spyder RT Audio
The 2011 Can-Am Spyder RT Audio represents technology and convenience, comfort and convenience come together for the best experience on extended expeditions. Its advanced vehicle stability system (VSS), cruise control and semi-automatic transmission optional to keep total control, while a high-quality chair, heated grips hand and optional audio system guarantee a luxurious experience for you and his companion. It offers a cavernous 41-gallon (155 L) of cargo capacity.

2011 Can-Am Spyder RT Audio Technical Specifications

Engine
Manufacturer BRP-Rotax®
Type 998cc, V-twin, liquid-cooled, DOHC 4
Bore & Stroke 3.82 in. (97 mm) x 2.68 in. (68 mm)
Injection Multi-point EFI system with 2 in. (51 mm) throttle body
Power 100 hp (71 kW @ 7500 RPM)
Torque 80 lb.-ft. (104 Nm @ 5000 RPM)
Transmissions 5-speed manual (SM5) with reverse OR
5-speed semi-automatic (SE5) with reverse
Magneto 650 Watts
Starter Electric
Battery 12 volts / 21 amps/hour, sealed maintenance-free

CHASSIS
Frame SST Spyder
Front suspension Double A-arm with anti-roll bar
Front suspension travel 5.94 in. (151 mm)
Rear suspension Swing-arm with pneumatic adjustable preload
Rear suspension travel 5.71 in. (145 mm)
Brake type Foot-operated, fully-integrated hydraulic 3-wheel braking system
Front Brake 4-piston calipers with (250 mm x 6 mm) discs
Rear Brake Single-piston sliding pins caliper with (250 mm x 6 mm) disc
EBD Electronic Brake Distribution
ABS Anti-lock Braking System
Parking brake Electro-mechanical system engages the rear caliper
Tires/Front 165 / 65 R14
Tire/Rear 225 / 50 R15
Front wheel Aluminum 6-spoke Metallic Silver 14 x 5 in. (355 mm x 127 mm)
Rear wheel Aluminum Metallic Silver 15 x 7 in. (381 mm x 178 mm)

SAFETY & SECURITY
VSS Vehicle Stability System
SCS Stability Control System
TCS Traction Control System
ABS Anti-lock Braking System
DPS Dynamic Power Steering

DIMENSIONS
L x W x H 105 x 61.9 x 58 in. (2,667 x 1,572 x 1,473 mm)
Wheelbase 67.2 in. (1,708 mm)
Seat height 30.4 in. (772 mm)
Ground clearance 4.5 in. (115 mm)
Dry weight 929 lb. (421 kg)
Total storage capacity 41 US gal. (155 l)
Front load capacity 35 lb. (15.9 kg)
Maximum vehicle load 525 lb. (240 kg)
Fuel capacity 6.6 US gal. (25 l)

FEATURES
Instrumentation Multi-function dot-matrix/dual analog gauge: digital speedometer,
tachometer, odometer, trip & hour meters, gear position,
temperature, engine lights, electronic fuel gauge, clock
Anti-theft system D.E.S.S. (Digitally Encoded Security System)
Lighting 2 halogen headlamps (60W) with tail light/brake light
Touring windshield Push-button electric height adjustment
Wind deflectors 2 driver wind deflectors
Cruise control Electronic
Heated grips Heated driver handlebar grips, High/Low/Off
Touring saddle Ultra comfort saddle with passenger backrest & driver lumbar support
Passenger floorboard Manually adjustable
Passenger armrests Standard on all Spyder RT Audio and Convenience models
RECC Roadster Electronic Command Center with LED accent lighting
Power outlet 12V lighter type, in rear cargo area
Trailer lock Barrel for RT-622 trailer (Trailer optional)
Warranty 2 years
Transmission SM5 – 5-speed manual with reverse
Colors Available: Pure Magnesium Metallic, Orbital Blue Metallic


Friday, May 24, 2013

2009 Norton Commando 961 SE Specs News and Review















In accordance with its name and heritage, the new Norton Commando is powered by a 961 cc, air-cooled, parallel twin engine, which manages to blend perfectly in this classic scenario while developing an impressive 80 Hp and 90 Nm. That is due to the electronic fuel injection system which, together with the three way catalytic converters, ensures that the Commando meets Euro 3 regulations.
A multitude of carbon fiber pieces lighten the bike and, according to Norton, this thing weighs only 415 pounds dry.

While qualifying for a decent power-to-weight ratio, the new Commando features goodies such as the electric start, constant mesh five-speed tranny and wet clutch, all being absolute must-haves considering today’s requests and fierce competition. So are the Brembo brakes, Ohlins suspensions and 17-inch modern, carbon fiber wheels that enhance the already consecrated sporty nature of this British icon.

Frame
- Frame: Steel tubular with integral oil tank
- Swing arm: Twin-sided steel construction
- Wheelbase: 1420mm (55.9 in)
- Rake: 24.5 degrees
- Trail: 99mm (3.9 in)
- Front suspension: 43mm Ohlins RWU
- Rear suspension: Ohlins reservoir-style twin shocks
- Front wheel: 3.50 x 17” BST Carbon Fibre
- Rear wheel: 5.0 x 17” BST Carbon Fibre
- Front tyre: 120/70 x 17”
- Rear tyre: 180/55 x 17”
- Front wheel travel: 115mm (4.53 in)
- Rear wheel travel: 100mm (3.94 in)

Transmission
- Gear box: constant mesh 5 speed
- Final drive: 525 “O” ring chain
- Clutch: Wet multi-plate hydraulic lifter
- Electric start

Thursday, May 23, 2013

2010 KTM 990 Supermoto R Specs News and Review

















Designed to push the limits further and further on the race track, the KTM 990 SM R is the most radical two-cylinder supermoto on the market. It is all the more surprising that town and city riding is at least as much fun as negotiating twisting roads on mountain passes.
The KTM stand is expected to be pretty crowded this November at the EICMA show in Milan as the Austrian manufacturer announces the official release of one of its most notorious naked motorcycle, the 990 Supermoto R.
At a first glance, the new bike distinguishes from the 2008 model year due to the new color scheme
featuring a set of white plastics mounted on the orange powdercoated frame. Also, the rims feature a nice, Y-spoke design and the swingarm is black painted on the 2009 model year.
The only downside yet to be identified is the reduced fuel capacity. Apparently, the gas tank became smaller in the designer’s attempt to create a sportier riding position.

Wednesday, May 22, 2013

Vario homage to Japanese Style

Vario homage to Japanese Style
Want to know the modifications scooter in Japan like? Incidentally Kompas.com ever go into the land of Sunrise, October 2009, modifications have nothing sekestrem in Indonesia. About her figure like a Honda Vario 2007 from Surabaya (East Java) plots the results Andit Kurniawan.

Matic modification of the flow of big Japanese, according to Andits cool. Unfortunately, in Indonesia have not been marketed. Hence, the idea arose to make the Honda Vario 2007.

The focus of the initial work done on the frame and legs to remove the entire cover body and two wheels, which must not be used. He then cut centerbone Ranka. Because, to make big-matic, one way to lengthen centerbone.

"fortunately canterbone Vario has a single, so it is easier to extend the area," he said. How, after the cut given the 25-cm pipe fittings, automatic axle dimolorin participate up to 20 cm to create a retreat-retreat.

In addition gambot body, another characteristic modification Japan, big tires. Here Andit wear size 7x14 inch rims wrapped in 140/70-14 tires for front and rear.

Success frame and legs, the work transferred to the body. In this sector, he admitted he was inspired by two Yamaha products, ie, Tmax and Majesty. To raises big impression matic, the chest must be raised. The trick, use the dimensions of the main light. Choices, finally falling on a Honda CBR900.

source:http://otomotif.kompas.com/read/2010/08/26/14552676/Vario.Beraliran.Japanese.Style

2009 KTM Duke Specs News and Review















2009 doesn’t bring a totally restyled 690 Duke so the bike works with the same longitudinally mounted streetfighter headlights integrated into an aggressive housing that looks like a pretty well made aftermarket piece even though it is a standard feature of the bike. The side plates and fenders look sharp too while the supermoto-style seat is positioned at 34.06" from the ground.
The 17-inch wheels, 320mm front disc brake and under engine exhaust all indicate that we’re dealing with a veritable sports bike while the supermoto-style handlebars works with the seat in order to get us pretty confused about the bike’s specific category, but even more interested to see what it’s up to when on the move.

Orange and White where the 2008 color schemes for this model and they carry on to 2009, but this year’s special color for the middleweight Duke is Black. If this would have only got an orange painted frame and upgraded engine, we would have talked about a very special 2009 KTM 690 Duke R, just as we did about the 2009 KTM 1190 RC8 R and 2009 KTM 990 Super Duke R models. These models are all related and it’s just too bad that the small Duke was excluded from the performance and visual upgrading process.

The All Kawasaki Ninja Gallery

There are All of Kawasaki Ninjas Sport motorcycle type picture Gallery

The All Kawasaki Ninja Gallery
The All Kawasaki Ninja Gallery
The All Kawasaki Ninja Gallery
The All Kawasaki Ninja Gallery
The All Kawasaki Ninja Gallery

2008 Desmosedici RR Specs News and Review













Like any motorcycle, the engine is one of the most important elements of the D16RR. It’s a liquid-cooled 990cc V-Four-stroke and is essentially the same engine used by the Marlboro Ducati squad in the 2005 MotoGP World Championship, before Dorna (MotoGP series organizing body) reduced engine capacity to its current 800cc.
Press the starter button and the engine roars to life. A fast-idle knob next to the throttle only exacerbates its sharp snarl as do the $8800 Termignoni titanium pipes straight off Ducati’s 2007-spec GP bike and available as a Ducati Accessory. The sound is absolutely intoxicating and is guaranteed to garner attention from any living creature within a 500-foot radius. Attention deprived? The Desmo is the answer.

At lower revs you’ll notice the engine’s docile power delivery. Simply put, you can ride this bike everyday—even through stop-and-go traffic, no problem. The fuel-injection provides precise engine response without hesitation, or conversely any surge. Whack the throttle and the V-Four spins up fast—much faster than Ducati’s 1098 V-Twin. Yet it lacks the outright torque of the aforementioned 1098.
Wrap out the throttle for just a second or two longer, however, and you’ll feel compelled to tuck underneath the windscreen as your body tries to slide backwards. Good thing the seat padding on the upgraded carbon fiber tail section (comes with the accessory exhaust) has plenty of grip. An intense tidal wave of power arrives at 10,000 rpm and rockets you forward as the handlebars wiggle and the front tire tries to creep skyward until the power slowly breaks around 13,000 rpm. The entire way, an orchestra of mechanical melodies blare an honest GP-bike song. When combined with the squirm of the Bridgestone rear tire and intense yet precise shake of the control surfaces, it becomes a sensory experience that no other production motorcycle can reproduce.

Unique Bikes Modifications Picture

Unique Bikes Modifications PictureUnique Bikes Modifications Picture

Unique Bikes Modifications PictureUnique Bikes Modifications Picture

Unique Bikes Modifications PictureUnique Bikes Modifications Picture

Unique Bikes Modifications PictureUnique Bikes Modifications Picture

Yamaha FZ review

Yamaha has launched its most awaited and world famed Yamaha FZ 1 in India at a price tag of Rs 8,70,000 (ex-showroom, Delhi). The bike is offered in two royal colours: black and white. The iconic bike is equipped with 998cc, DOHC, 5-valve, 4 cylinder, 4 stroke engine that belts out maximum power of 150 ps at 11,000 rpm and pumps out top torque of 106 Nm at 8,0000 rpm with the help of 6 speed gearbox. The FZ 1 has got front dual Hydraulic disc brake of 320 mm and rear Single hydraulic disc brake of 245 mm. The bike uses fuel injection system and electric start. and more product Yamaha R15

Overall

India Yamaha has entered in the Super bike segment long time back with Yamaha MT01 and Yamaha VMAX, it has added one more model to the sports range that is newly launched Yamaha FZ 1- a street bike. The company has launched this classy and trendy super bike with a price tag ot RS 8,70,000 (ex-showroom, Delhi) in Indian two-wheeler market. The Yamaha FZ 1 has got racing inspired body shape and features accordingly. The company also produces a smaller 600cc version named as Yamaha FZ 6.

The new street bike Yamaha FZ has got better design treatment that previously launched Yamah VMAX. With its very irresistible looks and features, it attracts huge volume of super bike lover with hefty pockets. The new Yamaha FZ 1 is categorically designed for the premium sector riders.

The all new Yamaha FZ 1 is loaded with an engine capacity of 998 cc. The engine of the sporty Yamaha FZ 1 is loaded with a 4 stroke, forward inclined parallel 4 cylinder, liquid cooled, DOHC valve configuration and fuel injection system. The engine of the new Yamaha FZ 1 is very powerful and also a great performer. The powerful and dynamic engine of the new super bike produces an awesome top power of 150 PS at 11,000 rpm and churns out a maximum torque of 106 Nm at 8000 rpm. It uses 6 speed multi-plate clutch that transform the motor power in smooth way.

The all new and stylish Yamaha FZ 1 looks very sporty and very aggressive with its VMAX like exhaust pipe razor sharp tail fender and front fairing around cowl and fuel tank. The bike is adorned with sharp and bold features which attracts huge volume of crowd. The bike is fitted with digital speedometer, odometer, indicators for neutral, dual trip meter, water temperature, high beam,low fuel and turn indicators. Front turn indicators and rear view mirrors look very impressive and elegant with their compact and sharp design job. The stylish big alloy wheels of the bike offer very macho and sporty look to the bike. The overall body finish adds more charm to the appearance of the new super bike.

The all new upcoming super bike Yamaha FZ 1 is loaded with very advanced technological features. The dynamic braking system and suspension system of the new bike ensure proper controlling and handling of the bike.

source:http://www.bikedekho.com/bike/yamaha/yamaha-fz.html

Tuesday, May 21, 2013

2012 KTM 500 XC W Specifications

2012 KTM 500 XC-W -  Specifications

  • Design 1-cylinder 4-stroke engine, water-cooled
  • Displacement 510.4 cm³ (31.147 cu in)
  • Bore 95 mm (3.74 in)
  • Stroke 72 mm (2.83 in)
  • Starter Electric starter/kick starter
  • Engine lubrication Pressure circulation lubrication with two rotary pumps
  • Primary transmission 32:76
  • Final drive 13:50
  • Cooling Water, permanent circulation of coolant by water pump
  • Clutch Multidisc clutch in oil bath / hydraulically activated
  • Ignition Contactless controlled fully electronic ignition with digital ignition adjustment, type Kokusan

CHASSIS
  • Frame Central tube frame made of chrome molybdenum steel tubing
  • Fork WP Suspension Up Side Down 4860 MXMA PA
  • Shock absorber WP Suspension PDS 5018 DCC
  • Suspension travel Front 300 mm (11.81 in)
  • Suspension travel Rear 335 mm (13.19 in)
  • Brake system Disc brakes, brake calipers on floating bearings
  • Brake discs - diameter Front 260 mm (10.24 in)
  • Brake discs - diameter Rear 220 mm (8.66 in)
  • Chain 5/8 x 1/4"
  • Steering head angle 63.5°
  • Wheelbase 1,482±10 mm (58.35±0.39 in)
  • Ground clearance unloaded 345 mm (13.58 in)
  • Seat height unloaded 970 mm (38.19 in)
  • Total fuel tank capacity, approx. 8.5 l (2.25 US gal)
  • Super unleaded (ROZ 95/RON 95/PON 91)
  • Weight without fuel, approx. 112 kg (247 lb.)

source: http://www.totalmotorcycle.com/motorcycles/2012models/2012-KTM-500XCW.htm






2011 Ducati Hypermotard News specs and Review

The lightweight, L-Twin stands at the pinnacle of more than three decades of Desmo air-cooled development and its torquey power delivery has excited riders worldwide. The Evoluzione version is positively awesome and makes it the perfect engine to give its name to the Hypermotard 1100EVO SP.
The 1100cc Desmodue Evoluzione power unit uses a bore and stroke of 98 x 71.5mm, and its long list of refinements boosted its power to 95hp (69.9kW) @ 7500rpm with 76lb-ft (10.5kgm) of torque @ 5750rpm giving it outstanding power delivery, from grunting low rpms to the singing howl at redline.
The 1100s crankcases are vacuum cast using the same Vacural technology employed for the lightweight Superbike engines, a process that achieves significant weight saving and ensures consistent wall thickness and increased strength.

But the crankcases were just the starting point of the evolution. Apart from the magnesium alternator cover, the 1100 has a lighter crankshaft assembly by using an 848-style Superbike flywheel and the search for further weight reduction even went as far as using lightweight rare-earth magnets for the generator assembly. The result reduced the original 1100 power units weight by a staggering 5.2kg (11.5lb) and contributed towards making the Hypermotard 1100EVO even more agile.
Power gains have come not only from the new lightweight crankshaft assembly, but also from an evolution of the top-end of the Desmodue power unit. The cylinder head, not only improves lubrication and cooling performance, but also uses a redesigned inlet port shape for optimum flow and a modified combustion chamber shape for improved burn efficiency.
This improved efficiency is the result of a higher compression ratio and the change to a single spark per cylinder ignition managed by high-speed Siemens electronics.

Yamaha V ixion white color

yamaha try, to find a new issue, very pantastis, looks very fresh with its new color yamaha v-ixion

Trends in white baseball bloom only on the car. Motorcycles are also, in the past five years included in the standard option, both in the classroom scooter, duck through sport. For the last type, try to look through a Yamaha V-Ixion new variants and on display at Pekan Raya Jakarta, Kemayoran.

Vixion the combined black and white, red and gray was introduced without a special ceremony by PT Yamaha Motor Kencana Indonesia (YMKI). Interestingly, despite the recent price displayed V-Ixion still long priced USD $ 21.115 million on the road in Jakarta.

"Sports do not merely an impression of black armature, but can also Sport elegant. The addition of this refresh only, like the white lion, grim but still cool,"said Eko Prabowo, General Manager of Promotion and Motorsport YKMI Kompas.com when contacted today. Eko added, the addition of white color was chosen because a lot of feedback received from consumers Yamaha.

source: kompas.com

2012 Kawasaki Z1000 Specs and Review


2012 Kawasaki Z1000
2012 Kawasaki Z1000 ... Over the past few years, the demand for naked sportbikes has continually grown, pushing manufactures into a constant-developing mode, whether its adding power or polishing aesthetics. Noticing this trend, Kawasaki totally revamped its flagship naked sportbike two years ago, the Z1000 getting additional power and a more aggressive makeover.
The heart of every naked bike is its engine, so Kawasaki engineers paid special attention here for 1043cc 16-valve inline four with dual cams. The dual-cam motor features a long stroke of 56mm for instant power, fuel injection and a six-speed transmission. Designed for the real-world streets, 2012 Kawasaki Z1000s engine creates flexible power across the rpm range, with gobs of mid-range.
Completely redesigned two years ago, 2012 Kawasaki Z1000s aggressive bodywork reveals the design teams attention to detail. The aesthetic showcase begins with a low-mount front cowl that slopes back radically, highlighting the Z’s prow and, behind it, an adjustable instrument cluster featuring a multifunction LCD display covered by a trick-looking orange lens. The line-beam headlights guts are integrated nicely into that angled cowl. Moving rearward, you come to a shapely fuel tank that’s flared on the sides to let you grab it with your knees and that’s trim at the back for a snug fit. The seat is low and narrow at the front to make ground contact easy, and flows beautifully rearward to end in a futuristically retro LED tail light behind a red lens. It’s a thoroughly athletic shape, one sure to garner attention wherever it’s ridden.
Suspension at both ends is thoroughly modern and wickedly functional: a beefy, fully adjustable 41mm inverted fork up front and a spring preload and rebound damping adjustable Uni-Trak® shock in back that’s mounted nearly horizontally above the swingarm to shield it from exhaust heat and foster an added degree of mass centralization. Wheel control is simply superb, and the substantial feedback sent to the rider makes it easy to know exactly what’s going on at the bike’s contact patches.
The chassis of the 2012 Kawasaki Z1000 features much technology, including an aluminum frame that cradles the engine from above, a design similar to the ZX-10R superbike. Built from racetrack input, this frame features a skinny mid-section, which provides much feedback to the rider.
There are other features that add to the overall aggression of the Z1000, including five-spoke wheels, shorter, 4-into-2-into-2 exhaust, a solid mount handelbar and aluminum footpegs and ninja-spec brakes.
2012 Kawasaki Z1000

2012 Kawasaki Z1000  Specifications/Technical Details
MSRP Price:
$10,799.00
Engine
  • Liquid-cooled inline-four offers substantial power at all rpm levels, providing effortless acceleration in almost any situation
  • Bore and stroke dimensions of 77.0 x 56.0mm offer the best possible balance of peak power and low and mid-range flexibility
  • 38mm downdraft throttle bodies allow intake air to travel to the engine in the shortest possible distance
  • Oval sub-throttles help keep the engine slim - a good thing since the throttle bodies are positioned between the riders knees
  • Soft rev limiter provides good overrev character; power doesnt drop off suddenly at high rpm
  • The crankshaft is positioned low in the crankcase assembly to allow a longer stroke without adding engine height
  • A secondary balancer, driven off a gear on the sixth web of the crankshaft, eliminates excess vibration
Intake System
  • The intake system routes cool air to the airbox from ducts above the radiator shrouds, minimizing performance loss due to heated intake air
  • Positioning the ducts close to the rider allows the intake sound to be heard - and enjoyed - by the rider
  • A resonator inside the airbox reduces noise at low rpm, and enhances intake sound at high rpm
Exhaust System
  • The exhaust system features a 4-into-2-pre-chamber-into-2 layout. Silencer end caps maintain the quad-style image
  • Main and pre-catalyzers provide cleaner emissions
  • Thanks to the under-engine pre-chamber, silencer volume is reduced, and silencer weight is low. Exhaust system offers excellent mass centralization and contributes to a low center of gravity
Gas Tank
  • Slim-type fuel pump features an integral fuel gauge
  • Fuel tank design and slim-type fuel pump minimize unused volume inside the tank; fuel capacity is 4.0 gallons
Chassis
  • Aluminum backbone frame designed specifically for the Z1000 (and similar in concept to the Ninja ZX-10Rs) helps make the bike narrow and easy to grip with the knees for maximum rider comfort and feedback
  • Lightweight and highly rigid, the frame uses the engine as a stressed member for a firm, planted feeling and enhanced stability
  • Frame is tuned to transmit the ideal level of engine feedback directly to the rider
  • The frames five-piece construction consists of steering stem, left and right main frames, and two cross pieces. The two main frame components have open C-shaped cross sections
  • As much as possible, welds were eliminated for simplicity and appearance. The frame beams and swingarm brackets are now single die-cast pieces
  • The frame uses four engine mounts; three mounts are rigid, while the upper rear crankcase mount is rubber
  • The rear sub-frame is a three-piece aluminum die-casting construction, which is light, strong and optimizes mass centralization
  • The sub-frame is an example of form and function combined, negating the need for side covers and allowing underseat narrowness for a shorter reach to the ground
Suspension
  • Rear suspension design positions the shock unit and linkage above the swingarm where its less exposed to exhaust heat and contributes to mass centralization
  • Visible from the outside, the horizontal monoshock contributes to the Z1000s aggressive appearance
  • Linkage characteristics are the same as those of a standard Uni-Trak® rear suspension: Wheel movement versus shock stroke is the same ratio
  • The shock features stepless rebound damping and spring preload adjustability
  • The Z1000s 41mm inverted fork is adjustable for compression damping, rebound damping and spring preload - and is protected from harm by a cool-looking shroud
  • Settings are designed for both sporty performance and excellent comfort
Controls
  • The tubular handlebar is rigid mounted, contributing to sharp, direct handling
  • A wide, flat bend handlebar offers a design similar to those on off-road bikes for excellent control
  • Tapered-type grips, like those used on supersport models, offer a more direct feel
  • Ninja ZX-10R-style footpegs with knurled surfaces offer good grip, direct feel and control, and no-nonsense looks
  • The passenger footpeg brackets incorporate convenient luggage hooks
Brakes
  • The Z1000s 300mm front petal-style brake discs are gripped by opposed four-piston radial-mount calipers. (Caliper piston size is 4x30 mm)
  • A radial-pump front brake master cylinder contributes to the superb control and feel offered by these high-end calipers
  • The rear brake is a single-piston, pin-slide caliper gripping a 250mm petal-style disc. The caliper is mounted below the swingarm, and located by a torque rod
2012 Kawasaki Z1000 Specs:
  • Engine: Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four
  • Displacement: 1043 cc
  • Bore x Stroke: 77.0 x 56.0mm
  • Compression Ratio: 11.8:1
  • Fuel System: DFI with four 38mm Keihin throttle bodies, oval sub-throttles
  • Ignition: TCBI Digital Advance
  • Transmission: 6-Speed
  • Final Drive: X-Ring Chain
  • Frame Type: Aluminum Backbone
  • Rake/Trail: 24.5 deg. / 4.1 in.
  • Front Suspension / Wheel Travel: 41 mm inverted cartridge fork with stepless compression and rebound damping, adjustable spring preload / 4.7 in.
  • Rear Suspension/Wheel Travel: Horizontal monoshock with stepless rebound damping, adjustable spring preload / 5.4 in.
  • Front Tire Size: 120/70 ZR17
  • Rear Tire Size: 190/50 ZR17
  • Wheelbase: 56.7 in.
  • Front Brakes: Dual 300mm petal-type rotors with radial-mount four-piston calipers
  • Rear Brakes: Single 250mm petal-type rotor with single-piston caliper
  • Fuel Capacity: 4.0 gal.
  • Seat Height: 32.1 in.
  • Overall Length: 82.5 in.
  • Overall Width: 31.7 in.
  • Overall Height: 42.7 in.
  • Warranty: 12 months
  • Good Times Protection Plan: 12, 24, 36 or 48 months
2012 Kawasaki Z1000 Color Option:
  • Candy Burnt Orange/Metallic Spark Black

2010 Honda Gold Wing Specs News and Review













The 2010 Honda Gold Wing comes more like a disappointment rather than the interesting new entry that the public had been expecting simply because the world’s ultimate touring motorcycle features no new technical innovation or design change that is characteristic to the class it proudly dominates and to it only. While remaining as reliable, comfortable and powerful as the previous generation model, the 2010 model year is a bit safer and the new color schemes still manage to make the bike stand out despite its old-fashioned look.

With a very comfortable chair positioned just 29.1 inches off the ground and an infinite number of goodies such as a CD player, navigation system integrated and multi-function display, just to name a few, 2010 Honda Gold Wing is a synonym for open road cruising in complete luxury and relaxation. Wet bike weighs 895-928 pounds depending on options selected.

2012 Suzuki Motorcycles

2012 Suzuki Motorcycles


Sportbike
- 2012 Suzuki Hayabusa*
- 2012 Suzuki GSX1250FA*
- 2012 Suzuki GSX-R1000
- 2012 Suzuki GSX-R750*
- 2012 Suzuki GSX-R600*




Cruisers
- 2012 Suzuki Boulevard M109R*
- 2012 Suzuki Boulevard M109R Limited Edition*
- 2012 Suzuki Boulevard C50T Classic*
- 2012 Suzuki Boulevard C50T*
- 2012 Suzuki Boulevard S40*




Touring
- 2012 Suzuki Boulevard C50T*




Motocross
- 2012 Suzuki RM-Z450
- 2012 Suzuki RM-Z250
- 2012 Suzuki RM85*
- 2012 Suzuki RM85L*




Standard
- 2012 Suzuki GSX1250FA*
- 2012 Suzuki TU250X*



Dual Sport
- 2012 Suzuki V-Strom 1000*
- 2012 Suzuki V-Strom 1000 Adventure*
- 2012 Suzuki V-Strom 650 ABS
- 2012 Suzuki V-Strom 650 Adventure*
- 2012 Suzuki DR650SE*
- 2012 Suzuki DR-Z400S*



Off Road
- 2012 Suzuki DR-Z125
- 2012 Suzuki DR-Z125L*




Kids
- 2012 Suzuki DR-Z125
- 2012 Suzuki DR-Z125L*
- 2012 Suzuki RM85*
- 2012 Suzuki RM85L*




Scooters
- 2012 Suzuki Burgman 650 Exec*
- 2012 Suzuki Burgman 400 ABS*

source: totalmotorcycle

Yamaha R1 2010

Yamaha R1 2010, The inclusion of D-MODE variable throttle control function enables the rider to adjust performance characteristics to match a variety of riding conditions. In addition to standard mode mapped for optimum performance, the rider can select from A mode for sportier response in low to mid-speed range, and B mode for somewhat less sharp response for riding situations that require especially sensitive throttle operation. These 3 different maps at the push of a button allow the rider to choose the optimum power character for their riding situation.

This revolutionary new engine is housed in an equally advanced chassis. Control filled die-cast frame rails balance high vertical rigidity with relatively low lateral rigidity for increased high speed stability while improving handling, especially while leaned over during corner exit. A control filled die-cast magnesium sub frame cuts weight far from the center of balance and contributes to concentration of mass.

Visually the new Yamaha R1 breaks new ground leading with twin projector beam headlights concentrated near newly placed forced air intake ducts. The sculpted body work features inner and outer shells controlling airflow around the bike at high speeds and forcing more cool air to the radiator and engine bay while eliminating the need for hot-air vents usually located at the sides of the radiator.

More than the just the next-generation of supersport; the YZF-R1 represents a major breakthrough in supersport technology and performance.

The 2010 R1 will be available in dealerships nationwide beginning in September 2009 with a starting MSRP of $13,290 and available in Raven, Pearl White and Team Yamaha Blue/White.

The R1 LE will be available in January 2010 with a starting MSRP of $14,500 and available in Fiat Yamaha Team graphics.

source: www.motorcycle-usa.com

2012 KTM 300 EXC

2012 KTM 300 EXC
Your two-stroke machine is a real torque-wonder with unbelievable power that makes light of the bikes low weight. UNBEATABLE POWER-TO-WEIGHT RATIO
ENGINE POWER AND WEIGHT
The understandable technology of the two-stroke engine has indisputable advantages, including a high power/displacement ratio and low weight. Unrivalled performance and playful handling are the results.

NEW INTAKE SNORKEL, NEW AIRBOX, NEW CYLINDER
BODYWORK
ADJUSTABLE ENGINE CHARACTERISTICS
ADJUSTABLE EXHAUST CONTROL AND ADJUSTABLE IGNITION CURVE
The sensitive responsiveness and outstanding damping of the open-cartridge fork with 48 mm (1.89 in) outer tubes are a perfect complement for the 300 EXCs playful handling and precision.
Practically unbeatable in terms of weight and stability, the new wheels have CNC-machined hubs, Excel rims, zinc/nickel-coated spokes and aluminium nipples.

Ducati 848

Ducati 848

So light, so powerful
The new Ducati 848 Nicky Hayden Edition enjoys all the performance advancements of the entire Superbike family, while adding its own innovations to redefine the middleweight sport bike class.

The highly advanced 848 engine uses an improved method of engine case production in which cases are vacuum die-cast formed. While providing significant weight savings of more than 3kg (6.5lbs), this method also ensures consistent wall thickness and increased strength. Further refinements include a sophisticated wet clutch that offers 1kg (2.2lbs) less weight, a much higher service life, improved clutch feel and quiet operation.

With the first twist of the wrist, the powerful rush of the Testastretta Evoluzione engine confirms that the rules have changed. The 848’s 134hp is not only 30% more powerful than its predecessor, but it provides a power-to-weight ratio even better than the potent 999.

Features in addition to the special Hayden livery and full specifications:

- LED dash illumination for better visibility – particularly at night

- Inclusion of a 30mm mirror extension kit, enabling a choice of two stem lengths for better vision

- Aluminium cam belt tensioner pulleys to reduce weight and moving mass; in turn enabling better acceleration.

The Engine

The 848 Testastretta Evoluzione engine becomes the benchmark for the middleweight sportsbike category, benefitting from all the experience accumulated with the larger engine on the 1198. It successfully adopts the same design guidelines and the same compact cylinder and cylinder head layout, but introduces for the first time ever an innovative solution for the crankcase, which has been designed with a further weight reduction for this advanced engine in mind. The overall layout of this engine integrates a series of avant-guard solutions, confirming the close links with the experience of Ducati’s racing department.

The 849cc engine has bore and stroke values of 94mm and 61.2mm respectively, which produce a ratio that is only slightly inferior to the 1098 (1.54 compared with 1.61), while maintaining the highly ‘over-square’ layout typical of racing engines.

Power output is an impressive 134hp (98.5kW) at 10,000 rpm and maximum torque is 71 lb/ft (96Nm) at 8250 rpm. The power and torque values confirm the high performance level of this engine, especially when compared to its predecessor, the Testastretta-engined 749.

The cylinder head has been modified in line with the characteristic bore and stroke of the engine in order to optimize the fluid dynamics of the intake (straight and plunging) and exhaust ducts and combustion chamber. The compression ratio is 12:1.

The valve angle is the same as the 1198 engine and diameter is 39.5mm for the inlet valve and 32mm for the exhaust. The technology used sees the application of a bi-metallic alloy that combines increased lightness with resistance and reliability required for these particular components. The desmodromic control system has also been designed with the weight and the inertia of the new components in mind, allowing extremely efficient valve lift during intake and exhaust phases. The excellent results achieved are confirmed by the engine’s power figures, producing outstanding performance thanks also to the use of MotoGP-derived elliptical throttle bodies, which have been fitted to the 1198 engine. The 2010 model year sees the addition of new lightweight cam belt tensioner pulleys; improving performance while shaving weight.

The design of a dedicated elliptical throttle body for the 848 demonstrates the attention that Borgo Panigale engineers have devoted to the development of the Superbike range. The cross-section is reduced from the 60 sq. mm of the 1098 to 56 sq. mm so as to optimize fluid dynamics at every engine speed. Just like on the 1098, the new cylinder heads benefit from fewer components and include magnesium covers.

This Testastretta Evoluzione engine sees the introduction of a special technology for the construction of the engine crankcase: Vacural casting. This is a forced vacuum die casting method that allows jet characteristics to be improved thanks to the absence of porosity, gas inclusion and oxidation. This allows extremely high measurement precision and greater ductility for aluminium alloy. Designers have been able to harness the benefits of this innovative process by redefining the shape and the wall thickness of the new crankcase by means of FEA (Finite Element Analysis) checks, which allowed the required reliability standards to be achieved, while simultaneously obtaining a significant weight saving of 3.5kg.

The 848 engine is fitted with a silent modular wet clutch, characterized by an exceptional resistance to wear that will lead to superior duration. This solution makes a useful contribution to weight saving, estimated to be around 1.6kg, which is also due to the use of a different type of clutch cover.

The high power figures achieved by this engine also come from the use of the same type of oil cooler and coolant radiator as the 1198’s engine, with an increased surface area assisted by lightweight, high flow electric fan assemblies.

The 848’s exhaust system follows the same layout and uses the same innovative technology as the 1198. The system terminates with Ducati’s trademark twin under-seat silencers, delivering the unmistakable signature sound of the big bore 90° L-Twin.

This power unit, just like all the other Ducati engines, has been designed to comply with Euro 3 exhaust emission norms.

Chassis

Trellis frame
Developed in cooperation with Ducati Corse, the 848 Trellis frame has a simplified tube layout featuring main section tubes increased in diameter from 28mm to 34mm, while being reduced in thickness from 2mm to 1.5mm. The result is a 14% increase in rigidity and a weight saving of 1.5kg (3.3lbs).

Single-sided swingarm
The 848, as all the Superbike family, is equipped with a unique single-sided swingarm. The engineers were encouraged to re-think the construction technique of this element. The solution was to produce the main operational components using individual aluminium castings so as to ensure strength around the pivot points, wheel hub and suspension links, with fabricated aluminium sections used to complete the construction into a single, beautifully engineered component.

Rear suspension
Highlighting the way in which individual components are influenced by each other, the new lightweight Trellis frame and single-sided swingarm have enabled a more compact and further weight-saving rear suspension linkage system to be used featuring separate lower pick-up points for the push-rod and suspension unit. This ‘tandem’ design effectively reduces stress around the linkage pick-up area of the Trellis frame. Working together with this highly efficient linkage is a fully adjustable Showa single shock for the 848, the same as the 1198.

Front suspension
At the front the 848 is equipped with fully adjustable 43mm Showa forks with radial mounts. This type of front suspension is professionally track-tuned and offers superior road holding, delivers superior feedback, and helps every rider to be more confident and in control.

Brembo Monobloc calipers
The 848 brake system is characterized by M4 calipers using four 32mm pistons and two radial mounted pads. Matched to the calipers are two 320mm discs and the combination of these elements achieves spectacular braking power.

Super lightweight wheels
The 848 also benefits from lightweight Marchesini Y-shaped spoke wheels. The weight saving of 250gr achieved on the front wheel substantially reduces the moment of inertia and enhances the 848’s change of direction and braking performance. The rear wheel is just as impressive with a complete redesign for its single-sided swingarm application that has resulted in a reduction of over 1kg compared with traditional Ducati single-sided swingarm fitments. Finally a 5.50” wheel fitted with a 180/55 tyre guarantees the maximum agility at the rear.

Electronics
Desmosedici-style digital instrumentation is taken from Ducati’s MotoGP GP9 project; and for 2010 now features LED backlighting for better visibility. This pure racing, minimalist solution has no switches or buttons to compromise its clean lines. Instead, information additional to the default read-outs is managed by handlebar-mounted switch gear, allowing the rider to scroll through and select from various menus. The default read-out presents rpm and speed, with the former displayed across the screen in a progressive bar graph. Optionally, the rpm and speed can be displayed in numeric values. The instrument display also doubles as a control panel for the activation of the data acquisition system as well as listing lap times recorded by using the high-beam flash button as a stopwatch.

With the purchase of the Ducati Data Analyser (DDA), which includes PC software, a USB-ready data retrieval card and instructions, owners are ready to review and analyse the performance of the bike and its rider, and make comparisons between various channels of information. The DDA is available from Ducati Performance.

Normally used on race bikes only, the system records numerous channels of data including throttle opening, vehicle speed, engine rpm, engine temperature, distance travelled, laps and lap times. The system also automatically calculates engine rpm and vehicle speed data so as to also display gear selection as an additional channel of information. At the end of a ride or track session, up to 2mb (approximately 3.5 hours) of data can be downloaded to your PC ready to compare, analyse and get an inside view of you and your 848’s performance.

Instrumentation
Digital Dashboard that displays derivation MotoGP: speedometer, tachometer, lap time on the stopwatch, clock, air temperature, water temperature, battery voltage, odometer, trip odometer fuel, preventive maintenance indicator. Spies segnalatiche: neutral arrows. projector beam, limiter, oil pressure, fuel level. Other Features: immobilizer, integrated DDA.




Suzuki Step Specifications

Specifications, Suzuki Step

Engine
Type: SOHC, 4-stroke, air-cooled
Piston Displacement: 124 cc
Bore x Stroke: 53.5 x 55.2 mm
Carburetor: MIKUNI BS26
Emission Purification System: PAIR/ Catalytic converter
Starting System: Kick/Electric
Compression Ratio: 9.6 : 1
Clutch: Automatic
Gearshift System: CVT (V-Belt)

Chassis
Front Suspension: Telescopic Coil Spring, Oil Damped
Rear Suspension: Swing Arm Type, Coil Spring, Oil Damped
Front Brake: Disc Brake
Rear Brake: Drum Brake
Front Tire: 70/90-14
Rear Tire: 80/90-14

Electricals
Battery type: 12V 3.5Ah/10HR (MF)

Dimensions/weight/capacity
Length: 1,859 mm
Width: 654 mm
Height: 1,046 mm
Seat Height: 745 mm
Ground Clearance: 145 mm
Dry Mass: 95.5 kg
Fuel Tank Size: 3.7 L.

source: http://mybikeshop.wordpress.com/2008/03/03/suzuki-step-125/

aprilia mille airbox modification aprilia mille airbox mod

aprilia mille specs

aprilia rsv mille review

The first RSV Mille was from 1998 to 2000, updating the RSV Mille from 2001 to 2002 and the last update was in 2003.With a 998 cc 60 degree V-twin engine built by the Austrian company Rotax, the RSV Mille was the first large displacement motorcycle made ​​by Aprilia which until then had done engines.This 250cc engine was used without modification in the same TUONO and slightly modified in the SL1000 Falco.

aprilia mille forum

aprilia mille rsv for sale

The Mille presented a type of slipper clutch, which worked with a vacuum in a closed throttle from the collector to check the effect of the slipper clutch, but only in a closed throttle.The changes were made early in 2001, when the dome was redesigned, adding wind deflectors to improve airflow. The fuel tank was changed to something plastic (with reduced capacity) and the rear shock in the standard models of the "R" was revised.

aprilia mille exhaust

2007 aprilia tuono r mille

In 2002, the front calipers Brembo Monobloc tweezers have been promoted to pad 4 - each piston has a separate pad gave an increase in braking performance and feel.In 2003, relations have been changing changed to a gearbox ratio of a little closer to the exhaust system and changed the piece of the tail and front fender were redesigned.





2011 Honda CBR600RR Specs

2011 Honda CBR600RR











No other 600cc machine has won more magazine comparisons and AMA championships than Honda’s CBR600. Striking the ideal balance of power and handling, the new CBR600RR blends a light and compact chassis with impeccable power delivery for a combination that’s hard to beat. Also available with the Honda’s unique Combined ABS for the pinnacle of sportbike braking performance, the 2011 CBR600RR continues to set the standard for the middleweight class.

Honda Vario with New Striping

Without ceremony, PT Astra Honda Motor (AHM) launched the Vario Series (all types) facelift. Automatic duck (betik) is more elegant, sporty and futuristic with new colors and stripping young and elegant theme.

For Vario Vario Techno and CBS got a refresher futuristic-themed colors and stripping. While the Vario Techno has a new color green according to consumers desire to replace the previous blue screen.

Since its launch in 2006, all types Vario population has reached 2,322,982 units and become one of Hondas mainstay model in Indonesia. As for January-July 2011, recorded sales of Vario Series 493 006 units, up 23.5 percent compared to same period of last years 399,233 units.

"We believe refreshment at Honda Vario Series is increasingly able to satisfy consumers desire to scooter elegant, sporty and futuristic and will strengthen Hondas penetration in this segment," said Director of Marketing AHM Auddie Alexander Wiranata in an official statement received Kompas.com, today (8 / 9).

Honda still membandrol Vario Series with the old price, namely Vario CW USD 14.4 million in four color options Black Velvet, Glam Red, White and Emerald Green Posh. While the Vario Techno Orion offers four colors: Black, Red Mars, Green and Cosmic White Android marketed at a price of Rp 14.9 million. The Vario CBS marketed in three colors: Black Comet, Aurora and Andromeda Violet White priced Rp15.9 million.

source: http://otomotif.kompas.com/read/2011/09/08/18313473/Honda.Vario.dengan.Stripping.Baru

XS650 Bobber Modification

 XS650 Bobber Modification

Buell XB9R Firebolt

Buell XB9R Firebolt - Sport Motorcycle
Buell XB9R Firebolt - Sport Motorcycle

The 2013 KTM 450 SXF

The 2013 model KTM 450SX-F represents a new SX generation. Above all, the ergonomics and function of the plastics have been designed in such a way that the whole chassis and engine package forms a perfect harmony with the rider down to the very last detail. The fuel tank and spoiler have been restyled along with the airbox cover and the front fender, including the front number plate. A particular highlight is the new front fender, which has no ribbing on the inside, to prevent mud build-up. A pioneering structure and improved attachment of the fender to the triple clamp result in up to 50% greater lateral stiffness. 

The engine arrive with 449.3 cm³ (27.418 cu in) SOHC SX-F, 1-cylinder, 4-stroke engine, water-cooled, engine lubrication used pressure circulation lubrication with two Eaton pumps, ignition contactless controlled fully electronic ignition with digital ignition adjustment, clutch used multidisc clutch in oil bath/hydraulically activated and 5 - speed of transmision.
The 2013 KTM 450SX-F used modern frame design of lightweight, high-strength, chromoly steel section tubes guarantees an ideal mix of longitudinal and torsional stiffness, resulting not only in easy handling and precise steering behavior, but also in excellent ride stability. The four-stroke frames in MY 2013 feature a stiffer frame triangle and thinner-walled down tubes. This leads to an improvement in tracking stability (increased torsional stiffness) accompanied by a reduction in weight. The engine braces to the cylinder head have also been optimized, along with their attachment to the frame.
This bike also used aluminum swingarm. Its has been developed with state-of-the-art calculation and simulation software and constructed, in terms of design and wall thickness, for minimum weight with optimum stiffness and sufficient flex. For the 2013 model year, engineers have redesigned the rear section of the swingarm to allow installation of a thicker rear wheel axle (25 mm (0.98 in) instead of 20 mm (0.79 in)) for the benefit of better tracking stability.
The fork used 48 mm (1.89 in) upside-down fork featuring closed-cartridge technology has been optimized with completely revamped settings developed in the United States for perfect harmony with the new frame and engine. The new oil is significantly more wear-resistant and guarantees more consistent damping throughout both the course of a race and the bikes life cycle. A new lower triple clamp is 80 g (2.82 oz) lighter and, just like the upper triple clamp, CNC-machined from high-quality aluminum, whereby the steering characteristics, and hence, the responsiveness of the fork have been noticeably improved.

2012 Piaggio Mp3 Touring 500 I E Business Review

2012 Piaggio Mp3 Touring 500 I.E. Business Review

The new Mp3 Touring is also available as the LT version, which may be ridden by holders of a normal passenger car license.
The Mp3 Touring brings completely revised looks and functionality to the most "classic" version of Mp3 while retaining the exceptional comfort, space and load capacity that have made the scooter a firm favourite for thousands of users all over the world.
2012 Piaggio Mp3 Touring 500 I.E. Business Model Highlights
Design
The evolved styling of the new Mp3 Touring is immediately evident at first glance. While retaining a distinct resemblance with the rest of the Mp3 family, the new Touring boasts a new honeycomb front grille and a satin-finish centre moulding in the front shield.

Touring 500ie: Mp3 to the Nth power
Mp3 Touring 500ie has been created to cater for the user looking for a vehicle offering superlative performance without sacrificing the elegance, comfort and unparalleled standards of active safety typical of the Mp3.
Powered by a high-performance 500ie engine with twin-spark ignition, the Mp3 500 delivers class-beating performance and is offered in two different spec levels: "Sport" and "Business".
Engines
Riding the Piaggio MP3 is an experience that revolutionises the very concept of mobility, with the dual wheeled front suspension system ensuring levels of stability in curves far superior to any normal scooter. At speed, and even when riding behind other vehicles, the Piaggio MP3 Touring stays glued to the road and always delivers maximum performance in total safety. Measuring no more than a maxi scooter and boasting incredible agility, the Piaggio MP3 Touring is completely at home in the city centre.
LT: The MP3 for everyone
All engine variants of the Piaggio Mp3 Touring above 125 cc are also available as LT versions.

Motorcycle Magazines Motorcycle Magazines Review Motorcycle Magazines Harley Davidson Motorcycle Magazines Usa

three wheel motorcycle,motorcycle saddlebags,three wheel motorcycle,outlaws motorcycle club
used motorcycle trikes

If you spend much time on his bike, but I get the best set of tires can be found at reasonable prices, maybe. After that the only thing to keep in contact with the bike tires are almost all, may be more important than buying a set of rubber reliable, high quality. But how did you select the tire that provides excellent grip and handling a large number of miles expected to live and how about you? In this paper, how to select and put the tire is considered to be the lowest possible cost. If you have an experienced pilot, tire brand and model you like is probably already so great that every time new drivers or new the tread reaches critical levels, when deciding whether to buy, people religion are buying options can be found in the earth, the range available in the market. The best thing to do is talk to people, such as access to testing as many as possible of a motorcycle magazine that familiar with this area. To get advice before you said that you need to get some sort in your head.

dirt bike parts and motocross parts at motorcycle superstore,motorcycle clubs all brands welcome,mickey mouse motorcycle christmas ornament
harley davidson motorcycle

You need to decide:

The type of riding you bike what kind? - The best choice is the only road over the weekend, if travel speed depending on the machine used for travel on a busy road five days a week, or has changed dramatically . Need a tire size, how? - In my opinion, stick to the size of the bike comes with a standard treatment in order to maintain their good songs. The huge rear tire is more important than our stay in the road always looks great.

cruiser motorcycle accessories and helmets,motorcycle jackets,motorcycle jackets,motorcycle trike kits
motorcycle superstore view shopping cart

What I want to spend much? - Most of us, so to get that motorcycle tires at the lowest possible cost, it is important that you have the luxury of being able to spend our hard earned cash with impunity. Fortunately find bargains recently, the Internet, now easier than ever. We just get the tires delivered to our house on low prices can reach the online search. The bottom line is, if you are looking for motorcycle tires, and approaches need to get your advice, there is little local experience, a friend of any of the critics and magazines is representative from . Use your expertise to get the most probably find that the best tires for your specific needs increasingly aggressive







2011 Aprilia Dorsoduro 750 Specs News and Review


2011 Aprilia Dorsoduro 750
2011 Aprilia Dorsoduro 750 is a concentration of pure technology enhanced by stunning lines and an aggressive look that comes not only from power and torque but from amazing agility too. Everything about this new Aprilia has been designed to be as light and effective as possible. The 2011 Aprilia Dorsoduro 750 is a motorcycle built to stimulate the senses of its rider.
The minimal and aggressive bodywork of the 2011 Aprilia Dorsoduro 750 adds the perfect finishing touches to the advanced motorcycle technology that forms the basis of its design. The Aprilia Dorsoduro 750 is built around the rider to deliver maximum riding thrills.

That is why this radical, daring and sporting machine shuns everything that does not contribute effectively to maximum riding pleasure. Plastic body panels have been reduced to a minimum for this very reason. As with top competition machines, anything that does not improve performance has been eliminated. Only the place for a number has been left to emphasis the bike’s close ties with the world of racing. The middle of the bike, the area most important to rider movement under competitive riding conditions, shows just how compact this design really is. The 2011 Aprilia Dorsoduro 750 is incredibly slender and agile and enters into instant symbiosis with its rider. Only a few metres on this amazing machine are enough to feel completely at one with it. Aprilia’s design team have achieved this impressive result by giving the Dorsoduro a long, flat seat, derived directly from the world of racing, allowing the rider to find the most effective position at all times.
The sleek, compact tail houses a twinned exhaust, a solution that not only gives the bike a mean, aggressive look but also achieves perfect symmetry and ideal weight distribution. The hand guards are derived from those of the SXV supermotard and, despite their streamlined look, offer effective protection against accidental impacts with the control levers.

SUSPENSION: EFFECTIVE ON ALL SURFACES
Optimum suspension setup has always been one of the strong points of the Aprilia design and testing team. The 43 mm upside down fork features shell-cast bottom outers with radial calipers mountings, and offers adjustments for spring preload and rebound damping. This sophisticated fork offers a superb sliding action and a wheel travel of 160 mm in line with the latest trends in supermotard racing. Both yokes are forged, and the top yoke is also anodised to match the Dorsoduro’s high level of finish.
The laterally offset monoshock pivots directly on the swingarm in a cantilever configuration, and is also adjustable in spring preload and rebound damping. Rear wheel travel is 160 mm, again in keeping the requirements of a top level supermotard, on which effective, controlled long stroke suspension is a must.

BRAKES: RACING TECHNOLOGY
The Aprilia Dorsoduro 750 is equipped with the best braking technology currently available. The front brakes feature 4-piston radial calipers, state-of-the-art for the motard market. The lightweight, 320 mm wave discs ensure shorter than ever stopping distances. The bike’s aggressive stopping power is emphasised by the mean look of the braking system, in keeping with the Dorsoduro’s overall styling.
The rear brakes incorporate another wave disc, 240 mm in diameter this time, plus a single piston caliper. Both the front and rear brakes are fitted with aeronautical type metal braided brake lines to eliminate the sponginess associated with conventional rubber hoses and to deliver maximum braking precision.

COMPONENTS
Supermotards are always no-frills machines, and sometimes quite spartan. This, however, does not mean having to do without top quality components and attention to detail. Here too Aprilia stands apart from the competition by adopting a level of equipment worthy of a true market leader:
- Matrix instrumentation. The mixed analog/digital instrument cluster receives data over a CAN line and incorporates a memory that forms an integral part of the diagnostics system. The ultra-compact instruments feature a modern design and are extremely light in weight. All functions can be accessed and controlled from the handlebars. The LED backlighting is white in the analog area and red in the digital area, and can be adjusted to three levels of brightness.
- Dual taper anodised aluminium handlebars exactly like those fitted to Aprilia’s racing supermotards. This super-lightweight component is specially designed for optimum dynamic control.
- Hydraulically operated clutch for a consistently precise action and exceptional smoothness. The clutch is also self-adjusting and completely maintenance free.

Extreme ModifikasiHonda Tiger 2006

Streetfighter, hot rod, drag racing look or a look is the flow of modifications of the builders followed the sport of motor overhaul or duck. But Eriko, Kiko Custom retainer from Pontianak, West Kalimantan not can even mention his work on the 2006 Honda Tiger.

He said, the shape is still unclear. Instead, he asserted tadpole appearance. Category can be entered as an extreme change for cut order and change in total body. In fact, there is the addition of a new framework on the side of the pipe 1-inch diameter round.

Framework functions in addition to that, according to Kiko – greeting friends Eriko – as a custom tank holder. In addition, very fitting for a solid impression. Installation using bolts placed into the original frame and swing arm (swing arm).

For the body, the center of contrived slim. Different as the front or aft of impressed swollen. Especially the rear, a unique shape and application of Yamaha Mio. As a result, many are asking why such a model.

To be back menungging, the framework behind the cut and redesain. Model is also unique enough seats in the middle of a large sphere. Although the figures look strange enough, but Kiko assure proper road bike.